5 Best Subwoofers for Edifier R1280DBs in 2023

Are you searching for the best subwoofer to pair with your Edifier R1280DBs speakers? If so, you’re in the right place!

Edifier R1280DBS is a popular bookshelf speaker that needs no introduction. Edifier R1280DBs offers rich, clear, punchy audio with good sound imaging and is among the most popular inexpensive bookshelf speakers.

However, you will agree that adding a dedicated subwoofer can greatly enhance the R1280DBS’s overall sound quality. That’s why the Subwoofer Line Out is there.

With so many available options, choosing the right subwoofer for Edifier R1280DBS can be difficult.

Here, we’ll discuss some of the best subwoofers for the Edifier R1280DBS and help you make an informed decision.

How do I connect my subwoofer to edifier R1280DBs speakers?

Connecting your subwoofer to your Edifier speakers is a simple process. 

Here are the steps:

  • Locate the subwoofer output port on the back of the Edifier R1280DBs. It Is labeled as “Sub Out” and has a single RCA connector.
  • Connect a single RCA cable from the “Sub Out” port to the input port on your subwoofer.
  • Turn on both the Edifier speakers and your subwoofer. You can further adjust the volume and crossover frequency on your subwoofer to achieve the desired sound balance.

That is it;

As a demo, you can watch the below video where Edifier R1280DBs are paired with Edifier T5 speaker.

Best Subwoofer For Edifier R1280DBs

1. Edifier T5 Subwoofer

Edifier T5 is a sturdy, powered sub that boasts exceptional sound quality and reliable build at an affordable price.

Edifier T5 Subwoofer

With an 8-inch driver and 70 watts of power, this subwoofer delivers a deep yet punchy bass. It has been engineered to perfectly balance the mid and high-range frequencies, allowing for minimal distortion and thus clear audio, even at high volume. 

A built-in low pass filter with a 38Hz cut-off frequency further supplements it. It ensures that high-frequency sound (that can be produced through the speaker) is not reproduced through the subwoofer. It helps deliver the perfect sonic effect. 

Edifier T5 is also notable for its impressive construction quality. It is housed in a solid, wooden enclosure that is strong yet relatively lightweight and, thus, easy to move around. Wood naturally reduces resonance, which remarkably enhances the sound quality.

There is also a bass reflex port/vent on the side that lets air escape and produces a more powerful bass response.

For more stability, rubber feet are also attached to the wooden cabinet, which protects against friction by preventing the sub from slipping around.  The aesthetic appeal of the sub, owing to its black vinyl covering, is another plus.

In conclusion, considering the positive customer reviews, optimal sound quality, and robust and modern design Edifier T5 is an impressive sub to consider. And the combination of edifier 1280DBs + Sub T5 can provide a good listening experience.

2. Sonos Sub (Gen 3)

Sonos is known for developing premium audio products, and their much-anticipated Sub Gen 3 has gained massive popularity since its launch. 

Sonos Sub (Gen 3)

The Sonos Sub (Gen 3) is a highly regarded subwoofer that can pair well with the Edifier R1280DBs for a more immersive listening experience.

The two inward-facing, 6-inch force-canceling drivers are powered by class-D amplifiers that minimize distortion and produce well-defined bass with little to no vibrations. It is further paired with 125-watt power for high-fidelity sound. 

Lateral reflections of sound waves from surrounding walls and objects largely influence audio quality. One of the most stand-out features of Sonos Gen 3 woofers is its Trueplay Tuning Technology, which automatically allows the sub to optimize the volume according to the room’s acoustics. 

Users can customize the sound system by adjusting bass levels and volumes with easy touch controls. 

Additionally, Sonos Sub Gen 3 remains unparalleled in its build quality. The rigid polymer case is built to withstand impact, heat, and humidity. Alongside durability, other design features like dimensions and long excursion also improve audio quality.

It is essential to mention that over Sonos sub-Gen 2, Gen 3 does not offer a significant difference in sound quality. You’ll not notice much of the difference in terms of the sound quality.

However, the Sonos Sub (Gen 3) came with an updated processor and increased memory, increased wireless range, and support for more audio codecs, including Dolby Atmos. In addition, the new design with a more rounded shape and a new finish gives it a more modern look. This may be important to some people if aesthetics are a priority.

So choosing between Sonos Sub Gen 2 and Gen 3 came to your personal preference and needs. If you already have a Sub Gen 2, there may not be any need to upgrade unless the aesthetic look is more important than performance. But if you don’t have a subwoofer, the new Sub Gen 3 is definitely worth considering for its improved performance and up-to-date look.

3. Polk Audio PSW10

Polk Audio PSW10 is a high-end, compact subwoofer that offers a superior audio experience. For a crystal-clear, distortion-free (<1%) bass, this subwoofer is configured with a 10-inch cone driver made of polymer that enables high precision in sound production. 

Polk Audio PSW10

The driver is enclosed in high-roll foam that prevents turbulence when playing music at a high volume. It is worth knowing that this size and material quality is unique compared to other subs of a similar price range. 

PSW10 is also efficient in terms of power. Its built-in amplifier generates 50 watts of continuous power and 100 watts of peak power. It helps deliver high-class, resonance-free bass. 

Polk Audio PSW10 is impressive in terms of its innovative design as well. It features an MDF enclosure that is dense and durable yet lightweight. Externally, this wooden cabinet is covered in black oak vinyl, giving the setup a modern look while protecting against abrasions. 

If you are an audiophile looking to elevate your streaming experience on a budget, Polk Audio PSW10 is a great option. 

4. Klipsch 12” R-12SWi Wireless Subwoofer

Wireless subwoofers that offer incredible audio quality at an affordable price are now easily accessible with Klipsch. Regarding sound quality and related features, the Klipsch subwoofer takes the lead in its price range. 

Klipsch 12” R-12SWi Wireless Subwoofer

It comes with 12-inch front-facing drivers made of copper and graphite, covered with a removable grille that protects the mechanical components. 

While the driver generates powerful bass from low-frequency waves (24Hz cut-off frequency), the material and 400-watt dynamic power ensure minimal distortion and low resonance in the sound. 

The sub is enclosed in a wooden cabinet, covered with smooth-finish polymer veneer that beautifully complements modern decor. The overall configuration also enhances audio quality while making the sub lightweight and easily portable. 

Touch controls and ports are attached at the back of the sub, and depending on where you place them, they might be difficult to access. However, once you set the subwoofer up, it easily connects to your sound system and offers excellent value for money. 

5. Rockville Rock Shaker

Rockville Rock Shaker Subwoofer is the ultimate sub for a premium and immersive listening experience. With 300-watt RMS and 600-watt peak power, this Rockville sub can deliver rich & deep bass over a wide frequency range (20Hz to 200Hz). 

Rockville Rock Shaker

It has a built-in Class D amplifier enclosed in a high-grade foam cone and voice coil that work together to minimize distortion. 

The sub features a floor-standing heavy-duty MDF cabinet that can withstand wear and tear and thus ensure longevity. For protection against scratches, a durable carpet is also reinforced on the case. Additionally, a removable grill is also attached towards the front, which serves to protect against impact and damage. 

The sub allows you to tune audio via easy volume and frequency controls attached to the system’s rear side. To sum it all up, Rockville 10″ 600-watt sub can be the one to go for if you are looking for a powered sub in the low-price range.

Factors to consider when choosing a subwoofer for Edifier R1280DBs

When it comes to choosing a subwoofer for Edifier R1280DBs, there are several factors to consider. 

Sound Quality 

A high-quality subwoofer should reproduce the sound accurately, with no distortion or clipping. Pairing a subwoofer with Edifier R1280DBs gets deeper and more powerful bass, so choosing one that can effectively do this is important.

A few things need to be taken care of in order for this to happen. In order to get the best sound, you will also need the right enclosure and driver for the subwoofer. The driver needs enough power to reproduce low-frequency sounds without distortion, while the enclosure should be constructed to provide the best bass response.

We will discuss the driver size and enclosure below in detail. However, it is important to note that if you want the most impressive sound quality, you must ensure these two elements are up to quality.

In addition, you should also check the subwoofer’s frequency response range. This will tell you what frequencies the subwoofer can reproduce accurately and effectively. Lower frequency ranges are better for deep, powerful bass.

Size of the subwoofer

Subwoofer size is another important factor you have to take care of. The size of the subwoofer will determine how much space it takes up in your room and whether or not it will fit into your setup.

For example, if you have limited space or want to conceal the subwoofer from view, a smaller subwoofer may be more suitable. But at the same time, a small subwoofer cannot fulfill the need for loud bass if you have a room with open space or the overall room size is large.

In such cases, a bigger subwoofer will be required. The larger size will also help to reproduce low-frequency sound accurately and powerfully.

Enclosure Type

The enclosure type you choose for the subwoofer should also be considered. The enclosure is the type of box used to house the driver, and it is an important part of a subwoofer’s performance. 

Mainly enclosure or subwoofer has two types – sealed and ported. Sealed enclosures are good for precision and accuracy, while ported enclosures produce a more powerful bass sound.

Sealed subwoofers, called acoustic suspension subwoofers, use an airtight enclosure to produce bass. And typically produce more accurate than ported subwoofers, with a tighter bass response that is less prone to distortion. 

On the other hand, ported subwoofers, also known as bass-reflex subwoofers, use a port (vent) to allow air movement. This type of subwoofer usually produces a more powerful bass sound with a low-end punch. But simultaneously, it may produce inaccurate bass due to the port design.

Choosing between sealed and ported subwoofers will depend on your preference. If you prioritize accuracy and clarity, then a sealed enclosure subwoofer is best. If you are looking for a more powerful bass, then ported subwoofer should be your choice. 

At the same time, consider the room size, listening environment, and listening preference.

Frequency range

The frequency range of your subwoofer is also an important factor. It determines how low the subwoofer can go and how effectively it can reproduce the bass.

Most subwoofers have a frequency response range that ranges from 20 Hz to 200 Hz and sometimes even higher. The lower the frequency range, the more powerful and effective bass sound will be produced. 

In addition, certain subwoofers also have an adjustable frequency response range. This allows you to customize the bass sound according to your preference and listening environment.

Power handling

The power handling capabilities of the subwoofer are also an important consideration. This will determine how much power the subwoofer can handle, which will, in turn, determine the volume level it can produce. Choosing a subwoofer with a power handling capability that matches your sound system is important.

Subwoofers usually have an RMS rating, which measures the power they can handle continuously without distortion. You can also look for a peak power rating, which is the maximum amount of power it can handle for short bursts.

A subwoofer with a higher power handling capability can produce louder and more powerful bass. However, it is important not to overpower the subwoofer, as this can lead to distortion and damage to the subwoofer.


Edifier R1280DBs are one of the best bookshelf speakers available on the market today. They provide crystal clear sound with excellent bass response, and they can be paired with a capable subwoofer to add even more depth and power.

We highly recommend the Edifier R5, Sonos Sub (Gen 3), Polk Audio PSW10, Klipsch R12SW, or Rockville Rock Shaker 10 subwoofer as the perfect options for your Edifier R1280DBs. Each of these subwoofers can elevate your audio experience and bring out the best in your speakers.

Ultimately, the choice of subwoofer comes down to personal preference and budget. Be sure to consider all the aspects discussed above – frequency response, enclosure type, power handling, and compatibility – when selecting the best subwoofer for Edifier R1280DBs.

With the right subwoofer, you’ll be able to bring your audio experience to the next level.

Scroll to Top